The expensive mistake here is not choosing wrong. It is launching a private label range with pants in every size, including the smallest, and discovering nine months later that the newborn and small sizes sell at a third of the rate of the taped equivalent while occupying the same shelf, the same print minimums and the same slot in your container. The format split is a range-architecture decision made at the artwork stage, and it is almost always made by whoever filled in the quantity column.
So treat this as two questions, not one: which format per size, and what has to be on the pack before it can be sold where you are selling it.
What the format actually changes
| Taped diaper | Diaper pant (pull-on) | |
|---|---|---|
| How it goes on | Laid flat, baby lying down; tape landing zone on the front panel | Pulled up over the legs; stretch waistband and side seams, no tape |
| Fits the baby who | Is not yet rolling or crawling, and is changed on a mat | Rolls, crawls, stands, or objects to being held down |
| Refastenable | Yes — can be checked and re-closed without waste | No. Checking means tearing the side seam, so a false alarm costs a unit |
| Changing a dirty one | Easier — the pad drops away from the baby | Harder, and the usual reason carers keep some taped stock for the overnight size |
| Construction cost drivers | Tape landing zone, frontal tape, elastic ears | Stretch side-seam bonding, elastic waistband; usually the dearer build at the same absorbency |
| Our range | Catalog sizes NB to XXL in magic tape; NB confirmed per order | Pull-on format available; confirm the smallest pant size with us before you plan the range — we do not assume a newborn pant |
Two points buyers routinely get wrong.
Diaper pants are not training pants. A diaper pant is an everyday absorbent product in a pull-on format. A training pant is a potty-training product, positioned, specified and often absorbency-rated differently. They look alike on a product photo and they are not interchangeable on a planogram, and if your brief conflates them you will receive samples that satisfy neither line.
The smallest size is where the range plan breaks. Pants in the newborn and small sizes are a much thinner market than pants in the middle and upper sizes, and not every source runs them. Ask which pant sizes are actually available rather than accepting a quotation for the whole ladder and sorting it out at production — ask us, and ask every other supplier, before the sizes go into artwork.
Where the split usually falls, and why it is yours not ours
The common architecture is taped in the small sizes, pants added from the middle sizes upward, and both formats running in parallel in the overlap where carers keep taped stock for overnight use. But the crossover point is a market behaviour, not a product fact: in some markets pants dominate from the moment a baby crawls, in others taped runs far higher for longer on price alone.
So do not let a supplier hand you the split. Bring your own sell-through by size, or your category's, and build the range against it. Ask every supplier to quote both formats across the sizes you name, so the comparison is like for like.
Sizes and weight bands — read this before you print a chart
Size letters are not standardised across the industry. One brand's L and another's L can sit on different weight bands, and the band printed on a pack is a fitting guide rather than a specification you can test against. We do not publish a weight table here, because the band has to come from the supplied specification for the item you actually buy, and a chart copied from elsewhere is the fastest way to a mislabelled pack. Ask for the band per size in writing, with the pad dimensions and the waist stretch range alongside it, and have it stated in the order.
While you are there, pin the absorbency method. There is no single statutory absorbency test for baby diapers — the Rothwell method in ISO 11948-1 belongs to adult incontinence products — so "high absorbency" means nothing until you name the method, the limit and whether it is tested per batch. Write the method into the purchase order or accept that you have no basis for rejection.
Where two quotations differ
In rough order of money:
- Absorbent core construction — fluff-to-SAP ratio and total core weight. The largest spread, invisible on a photo.
- Format build on the pants line: stretch side-seam bonding and waistband elastic are a real cost step over tape.
- Top sheet and back sheet grades, and whether the breathable back sheet is breathable across the whole panel or only the wings.
- Leak guard construction — ours is a 3D guard; the height and elastic count behind that phrase vary widely between suppliers using the same words.
- Pack count and compression. Bale compression changes your cube more than almost anything else in the quote.
- Print minimums. Each size is its own bag artwork; each language version is its own minimum.
RFQ fields, ordered by how much they move the number
- Destination market list — it sets the responsible-person obligation, the label language set and the claim set before anything technical.
- Formats per size, with the pant sizes you need confirmed as available.
- Core specification: total core weight, fluff-to-SAP ratio, and the absorbency method and limit you will test against.
- Weight band and pad dimensions per size, as supplied rather than as copied.
- Top sheet, back sheet and leak-guard construction, each with a measurable rather than an adjective.
- Count per pack and per carton, and the bale compression you want quoted.
- Print: bag artwork per size, language versions, barcode ownership, who signs off.
- Inspection stage, who pays, and the annual volume behind the first order.
Inspection and the AQL question
Sampling is the uncontroversial half: pull against ISO 2859-1, general inspection level II, with the lot defined as the production batch, plus a during-production check while the line is running.
The acceptance figure is where buyers drift, and the drift comes from a glove standard. Diapers carry no statutory acceptance number; the category where one is written into law is examination gloves, where the US applies AQL 2.5 under 21 CFR 800.20 and the EU AQL 1.5 under EN 455-1. A supplier quoting "the usual AQL 1.5" for diapers is reading a glove standard at you. Define the classes yourself with named examples: tape not adhering or pre-stuck, side seam open or over-bonded, core displaced, leak guard elastic broken, wrong size in the bag, count short, print misregistration or wrong language version, bale split in transit. We accept the inspection company you nominate, or we use the inspection company we work with on a continuing basis.
Packing, cube and the tariff line that moves with the material
| Commercial term | What to fix in the purchase order |
|---|---|
| Packing hierarchy | Piece → bag → bale or carton → pallet, with the count at every level, bale dimensions and gross and net weight per size |
| Count reconciliation | Reconcile by piece, not by bale. Sizes share a bale size at different counts, and that is where the credit note starts |
| Compression and cube | Agree the bale compression in the specification. As planning figures only: 20ft roughly 26–28 m³, 40ft 55–58 m³, 40HQ 65–68 m³ — diapers are the clearest cube-out cargo in this catalogue, so compression is worth real money |
| Pallet configuration | Pallet type, bales per tier, tiers per pallet, pallet-in or floor-loaded, and whether heat-treated pallets are required at your port |
| Incoterm and port of loading | State both. An EXW number, a FOB number and a DDP number are three different prices; compare only like with like, and check your own duty line first. Ask your supplier to state the Incoterm and named port of loading in the quotation |
| HS line | Subheading 9619.00 covers napkins and liners for babies and similar articles, of any material — and the US subdivides it by material: of plastics, of paper pulp, and of paper, cellulose wadding or webs of cellulose fibres, with a further statistical split for diapers and liners. Lookup sites disagree on the statistical lines and rates, so confirm against the official tariff or a binding ruling. We do not quote duty rates |
| Packaging rules | EU packaging is moving under the Packaging and Packaging Waste Regulation; settle recyclability and labelling expectations with your own compliance team before the bag artwork is cut |
| Price and payment | Indicative USD per carton against current fluff pulp and SAP costs, with a stated validity window and the payment terms named in the order. An open-ended price here usually means the core weight or SAP ratio has room in it |
That HS row deserves a second read: the line turns on material, not on what the product is called, so a construction change treated as internal — a different back sheet, a different core mix — can move the duty without changing a word on your pack. Confirm the line for the construction you buy, and again after any core change.
Price, minimum order quantity and lead time are confirmed with each quotation, against your specification and destination market.
Who carries the liability on a private label pack
This is the part that private label buyers under-budget, because on a private label range the name on the pack is yours.
In the EU, the General Product Safety Regulation (EU) 2023/988 has applied since 13 December 2024. For products coming from outside the EU it requires a responsible economic operator established in the EU, and that operator's name together with a postal and an electronic address has to appear on the product or its packaging and in the online listing. If you sell through a marketplace, the marketplace carries its own obligations alongside yours. Settle who that operator is — you, an importer, or an appointed representative — before artwork, because it is a panel on every bag in every size.
Three fields belong on your supplier file whoever you buy from: the legal manufacturer, the EU responsible person or authorised representative where you sell into Europe, and the US agent or responsible party where one applies. Ask every supplier for all three in writing, with entity names and addresses exactly as they will appear. We confirm ours for your destination market with the quotation rather than printing it on a web page.
Change control and traceability
The third order is where this goes wrong. Ask for a written change notification policy covering a change of SAP or fluff supplier, top sheet or back sheet grade, elastic supplier, tape supplier, bag film or production site. A change of SAP supplier is the one most often treated as internal — it is not, because it moves your absorbency result and can move your tariff line.
Ask for the lot code on the bag and the bale so a complaint traces to one batch, and for the lot-code key with the first shipment. Our own policy: we notify specification changes in writing, and that notification is for your records — we do not hold production for a written approval from you. If your retailer's quality system needs an approval gate, raise it at the purchase order stage so it sits in the terms. Ask also for the retention sample policy and the shelf life claimed.
When a two-format range is the wrong call
Below roughly a container a year per size, running both formats across the whole ladder is a false economy: you pay two sets of bag plates and two minimums per size for a shelf that cannot turn them. Launch taped across the ladder, add pants only in the two or three sizes your category data says carry them, and widen later. The most common version of this mistake is a six-size, two-format launch on one container — which is twelve artworks and twelve minimums before a single pack has sold.
What to send us
Send your destination market list, the formats you want per size, your core weight and absorbency method, your count per pack and your annual volume by size. Ask every supplier for the specification per item with the supplied weight band, the absorbency result against your named method, and bale and pallet figures for your cube maths.
Start from the baby diapers for private label page, or take in the whole baby care products wholesale range. Ranges are rarely awarded alone, so the baby wipes private label supplier line and the broader hygiene products supplier catalogue are worth opening in the same session. For the full project path from brief to first production run, see our private label baby diapers OEM guide — this article deliberately covers only the format and size-split decision.
FAQ
Which pant sizes can you actually supply? Have availability confirmed in writing per size before you plan artwork, because the smallest pant sizes are a thinner market than the taped equivalent and that is better settled now than at production.
How is the minimum first order set — by size, by format or by container? Per size and per format, because each is its own bag artwork and its own run. On a private label launch the binding minimum is almost always the bag print rather than the diapers. The figure comes with the quotation for your range plan.
Can you send samples before we commit to a range? We supply samples free of charge. A sample in the sizes and formats you plan settles tape feel, side-seam strength and pad dimensions before any plates are cut.
Which documents should come with the shipment? Ask for the invoice and packing list split by HS line, the batch record for the lot shipped, the absorbency result against the method named in your order, the specification with the weight band as supplied, and the inspection report where agreed. Tell us the destination market and we will send the exact documentation package for that product.

